Kohler C3-520 Manual del propietario - Página 11

Navegue en línea o descargue pdf Manual del propietario para Aseos Kohler C3-520. Kohler C3-520 41 páginas. Smart seat
También para Kohler C3-520: Manual de instalación (17 páginas), Manual de instalación (33 páginas), Manual de instalación (17 páginas)

5. Preparation before the Initial Use

Ensure if water inlet valve is OPEN.

Connect the inlet hose; open the water stop valve and connect the power.

Toilet generates one short beep once it is plugged in. The nozzle stretches

out and draws back once. Backlight on the side panel lights up and the night

light flashes until the initialization process completes.

During initialization, it is normal to hear rotating sound of the motor and bicker.

Wrap seat with plastic sheet to prevent splash water from toilet during test.

The seat is designed not to function without an occupant. To activate the seat

controls for testing purposes, when facing the toilet, place your hand or a damp

wash cloth on the right side of the seat approximately 1/3 from the front of the

seat (sensor area).

Proceed to the "Keypad and Panel Diagram" and "Other Function Introduction"

Sections to test the various seat functions.

The Bidet is set to Factory mode before initial use:

Front/rear/defecation wash:

Water temp: mid

Water pressure: mid/mid/high

Position: mid distance

Kid wash:

Water temp: mid

Water pressure: low

Position: far distance

Kohler Co.

Auto deodorizing: ON

Massage: OFF

Seat temperature: mid

Dryer temperature: mid

Night light: on

Energy saving: off

Auto sanitizing: ON

Prolonged seating indication: OFF

1350325-KR01-A