Aqua Exclusive C-30 PRO Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Sistemas de filtración de agua Aqua Exclusive C-30 PRO. Aqua Exclusive C-30 PRO 20 páginas. Drum filter
También para Aqua Exclusive C-30 PRO: Manual del usuario (18 páginas)
Imprimir páginaInstalling the Rinse Pump
•
It is important, however, that high-pressure hose/PVC pipe is used for this purpose.
•
The pump generates a pressure of 3 bar. Pressure peaks of 4 bar may occur during start-
up. Therefore do not use sewer & drain PVC.
•
The high-pressure pump itself must be placed in a moisture-free location below the water
level.
1. Place a flexible tee coupling (2) at the output (1) of the filter. One output of the tee cou-
pling is for the rinse pump (7) and the other serves as a passage to the pond pump.
2. Connect the output of the tee coupling to the rinse pump (7) and the rinse pump to the
spray tube (5).
Figure 9: Overview of the C-25 EVO with a rinse pump.
1. Filter outlet 4" (110mm)
2. Flexible Rubber Tee Coupling 4" (110mm)
3. PVC Reducer ring
4. Hose/PVC pipe to Rinse Pump Inlet
5. Spray Bar
6. Hose/PVC pipe from Rinse Pump Outlet to Spray Bar
7. Rinse Pump
Installation
Rinse Pump
Aqua Exclusive
13