AVPro Edge AC-CXWP-HDMO-T Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Transmisor AVPro Edge AC-CXWP-HDMO-T. AVPro Edge AC-CXWP-HDMO-T 4 páginas. Wall plate transmitters

Imprimir página
AC-CXWP-HDMO-100KIT
When paired with the AC-EX100-UHD-R3
the wall plates are able to transmit 4K
at 70 meters or 1080P at 100 meters. EDID
management is available on this receiver.
AC-CXWP-HDMO-70KIT
When paired with the AC-EX70-UHD-R
the wall plate is able to transmit 4K
at 40 meters 1080P at 70 meters. EDID
management is not available for this
receiver but is still available on the wall
plate.
Installation of the Wall Plate Extenders and connection order:
1)
Mount the wall plate in the mud ring.
2)
Connect category cable between the Wall Plate and the Receiver*
3)
Plug in the power into the Receiver. The Wall Plate Transmitter will
receive power from the receiver through the Cat Cable (POE)**
4)
Plug in a HDMI cable from the receiver to the display.
5)
Last step: plug in a HDMI from the source to wall plate.
6)
Source will now transmit to display.
*If the Cat Cable is connected correctly a solid amber light with a flashing green
light will turn on at the ethernet port. This means there is a good link and that data is
being transmitted between the wall plate and receiver.
**If you will be using the unit directly into a NON POE Provider (AVR,
Projector, Display, or other HDBaseT receiver), you can power it using a 5V MINI