AVPro Edge AC-DA210-HDBT Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Cables y conectores AVPro Edge AC-DA210-HDBT. AVPro Edge AC-DA210-HDBT 19 páginas. Hdbaset 2-8-2 splitter with audio de-embedding, edid management, and switchable inputs

AC-DA210-HDBT
Switching:
The AC-DA210-HDBT can be switched from the front panel by pressing the
"Select" button. This switches back and forth from Input 1 and Input 2

EDID management:

1.
Pressing and holding the button for more than 3 seconds will enter an
EDID management mode.
2.
When in EDID management mode the HDMI out LED's 1&2 will be
flickering.
3.
HDBT out LED's 1 through 5 are used to identify the EDID setting.
4.
Press the button to cycle through the available EDID's
5.
Press and hold for 3 seconds again to set the selected EDID
a)
If all LED's light up it is successful, and press the button once more to
return to normal operating mode.
b)
If all LED's are flickering, the setting failed. Press the button to resume
normal operating mode and try again.
6.
The table below (Page 8) shows the different EDID options.
Page 7