AVR Cinema Mirror HC 37.53 Instrucciones y consejos para la instalación - Página 2
Navegue en línea o descargue pdf Instrucciones y consejos para la instalación para Accesorios para proyectores AVR Cinema Mirror HC 37.53. AVR Cinema Mirror HC 37.53 9 páginas.
Imprimir páginaINSTRUCTIONS AND TIPS FOR THE INSTALLATION
OF THE HC 37.53 MODEL CINEMA MIRROR
GENERAL RECOMMENDATIONS FOR ASSEMBLY AND INSTALLATION
BEFORE USING FOR
T H E
F I R S T
2
Before proceeding to the installation and
manipulation, read carefully this manual and
follow conscientiously all the warnings and
cautions that are described.
GENERAL RULES
The equipment should be installed by
installers specialized in public locations. Install
and protect the line in accordance with the
low-tension electrical technical regulations,
as well as the MIE-BET-025 complementary
technical instructions, "Installations in
locations of public concurrence" . The
equipment should be connected to ground
protection.
All the required electric works of this
equipment should be carried out by
electricians, qualified electronics or
competent people according to the electrical
technical regulations of each country.
The alimentation requires an automatic
bipolar switch with
separation between contacts.
Flammable materials must not be
placed within a radius of 1 meter of
the equipment
(see instruction manual
of video projector to be installed).
Secure and protect the alimentation cables
and hoses, gear, material, etc. in such a way
that they are not near: moving parts or heat
sources.
The equipment must be installed in the
ceiling at a distance so that it is not within
arms reach of a person. Secured above the
site itself or on a metallic bracket strong
enough to hold the weight of the equipment
plus the image projector.
The equipment operation is: for interior use
in a false ceilings.
T I M E
The operating position is horizontal with the
hatch facing downward.
The equipment will not be accessible during
operation, before accessing the means of
connection or the inside of the equipment,
all electrical alimentation circuits of the
equipment must be disconnected.
In the event of any questions, contact the
Technical Service or your distributor.
SAFETY
The equipment should be examined every
90 days, the structure fasteners, movable
parts, mechanical cables, electrical parts, etc.
should be checked and lubricated if
necessary.
Do not install this unit in an unstable place.
Do not alter neither modify this unit.
Do not use this unit in a bathroom neither
MINIMUM
3 mm
near liquids or inflammable gases.
Do not connect the unit to an electric tension
different from the one specified.
Do not force the storm door in their opening
or closing journey, since the mechanics of
the motor could be seriously damaged.