AVS Bugflector II Manual de instrucciones de instalación - Página 2

Installation Steps

Press (6) hood inserts into the (6) square holes. If

necessary use tape to hold them firmly in place.

Using a phillips screwdriver install (6) screws with (6)

washers at the locations noted in Step 3.

square hole

hood

hood insert

hood shield

washer

screw

DO NOT OVER TIGHTEN

Close hood, and install bump ons at pre-cleaned loca-

tions on the painted hood surface.

• Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our

products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in

terms of fit, durability, finish and ease of installation.

™

Auto Ventshade

NOTE: Actual application may vary slightly from illustrations.

800-241-7219 • Visit us at lundinternational.com

, the Auto Ventshade

logo and the AVS

Align pre-drilled holes in hood shield with holes in hood. Place

Adjust bumper stops as needed to ensure hood shield clears grille

Lund International

logo are trademarks of Lund International, Inc.

Page 2 of 2

hood shield on hood.

and headlights.