AVS Pixim212VIR Manual - Página 2

Navegue en línea o descargue pdf Manual para Cámara de seguridad AVS Pixim212VIR. AVS Pixim212VIR 2 páginas. Andal-proof & waterproof wdr ir d&n 3-axis dome camera

◐ SPECIFICATION
Model No.
Pixim212VIR
Image Sensor
1/3" PIXIM DPS SENSOR - SEAWOLF
Effective Pixel
758(H) x 540(V) Pixel
Resolution
690 TV- Line
TV Type
NTSC
Sync. Type
Internal / External
Scanning System
Progressive scan
Video Output
1.0 Vp-p(Sync. Negative) Termination 75Ω±10%
γ = 0.45(Selectable)
Gamma Characteristic
White Balance
ATW / AWC / MANUAL(2,000 ~ 11,000 )
Min. Illumination
0.005
Lux(Sense up X
64
S/N Ratio
More 50 dB(AGC OFF)
SDNR
Backlight
WDR / BLC / OFF
Day & Night
True D&N(AUTO / COLOR / BW)
LED Output
IR LED 24pcs(
Gain Control
AUTO / MANUAL
Sense Up
Max. X64(X2, X4, X8, X16, X32, 64)
Test Illumination
Average test illuminance by front view
Power Supply
Regulated 12V DC or 24V AC
Current Consumption
Max. 500mA(at 12V DC) LED ON, Max. 510mA(at 24V AC) LED ON
:
Reverse Polarity Protection
Lens
f = 2.8 ~ 12mm Vari focal auto iris lens
Operation Temp.
14℉ ~ 122℉
Preservation Temp.
-4℉ ~ 140℉
Dimension
Ø150.5 x 95.6(H)mm
Weight
Approx. 1.76 lbs
◐ FUNCTION SETTING
1. How to use the jog lever
7
6
MIN
①ENTER :
Push the lever : Used to access the menu and confirm selection.
ㆍPush the lever for one second : Open the menu or close the menu.
Used to return to previous menu from the motion detection or
privacy mask setting section.
②UP, ③DOWN :
Used to move the cursor to up or down.
④ LEFT, ⑤ RIGHT :
Used to move the cursor to left or right and
change the value.
⑥EXT-VIDEO :
Extra video output terminal for installation. Plug your
test monitor in hear. The cable is option.
⑦LED :
LED level adjust.
<Caution> In case of operating "LED", don't put stress excessively.
2.
OSD menu structure
OSD Menu Select Menu
LENS SELECT
), 0Lux(LEDs ON, Max.
100ft
)
ON
EXPOSURE..
Level adjustable
)
X
:
Yes
WHITE
BALANCE
DAY&NIGHT
IMAGE
ADJUST..
Sub Menu
Summary
DC
Lens type selection
(Fixed iris lens or Vari-focal auto iris lens)
MANUAL
*Preset mode for common application to speed up installation
CUSTOM
User setting value
PRESETS
INDOOR
For indoor
WINDOW
Maximizing WDR function
OUTDOOR
For outdoor
LOW
Although the subject had a bright light behind
NORMAL
of it, you can see the subject clearly as well
WDR
MEDIUM
as background
HIGH
OFF
Determines that use BLC(Back Light Compen-
BLC
sation) function or not
ON
CUSTOM - -
LOW(24)
AGC level selectable
AGC
(Custom- - Limit : 60)
MEDIUM(30)
HIGH(36)
Determines that use the SENSE-UP function or not and
SENSE-UP level selectable
OFF
No use sense-up mode
SENSE-UP
Use sense-up mode automatically in low
AUTO- -
illumination(Limit : 2X ~ 64X)
MANUAL- -
Sense-up level selectable between x2 ~ x64
OFF
Optimized mode for flicker(If user choose CRR2
CRR
mode, AWC mode is not available on the White
FLICKERLESS
Balance menu)
CRR2
Balances the color automatically depending on
ATW
the source of light from 2,000 ~ 11,000
Move the camera lens toward to white paper
then press the enter button to find the optimal
AWC
white balance for current environment(User can
not use this mode when Flickerless is CRR2)
Adjust the Red or Blue values to shift the color
R/B - -
of the object
MANUAL
KELVIN- -
Adjust color temperature
INPUT DELAY
The camera automatically detects lighting
AUTO
(Sec)
condition and selects the mode accordingly
COLOR
The picture is always displayed in Color
The picture is always displayed in Black and
B/W
white
Change the GAMMA of the screen
GAMMA
25 ~ 45 ~ 100
(Default : 45)
Change the sharpness of the screen
SHARPNESS
MIN ~ MAX
(Default : Max)
Change the color gain of the screen
COLOR GAIN
-8 ~ 0 ~ 8
(Default : 0)
OFF
Normal image(No image inversion)
HORIZ
Set a horizontal image inversion
FLIP
VERT
Set a vertical image inversion
BOTH
Set horizontal and vertical image inversion
OFF
Normal image(No Zoom)
ON
Max 4x digital zoom available
ZOOM
PAN, TILT : Zoomed in image can be moved to
horizontal and vertical
OFF
No use motion detection function
AREA SELECT
Select motion detection area up to 4 area
- Adjust position & size of motion detection area
- Press the enter button to move into the motion
area setting section, whenever you press the
MOTION
enter button, the mask color is changed.
ON...
- When the mask color is white you can set the
AREA 1 ~ 4
position of mask by up, down, left and right
button.
- When the mask color is green and red you
can adjust the size by 4 buttons.
- Press the enter button for a few second to
escape.
OFF
No use privacy mask function
- Allow you to mask certain areas of the screen,
support 12 privacy zone
- Press the set button to move into the privacy
mask setting section, whenever you press the
set button, the mask color is changed.
- When the mask color is white(or black or red)
MASK 1 ~ 12
PRIVACY
you can set the position of mask by up, down,
ON- -
left and right button.
- When the mask color is blue, you can adjust
the size by 4 buttons.
- Press the enter button for a few second to
escape.
Select mask color(White, Black, Red)
MASK COLOR
RS-485
ID setting for RS-485 communication(1~255)
CAMERA #
SETUP*
Display the camera ID on the screen
ID DISPLAY
FUNCTION
SETUP..
CAMERA ID
Change the camera ID
CAMERA ID
SETUP
Select the position to display the ID on the screen
ID POSITION
Internal Sync with 12V DC power
INT
External Sync with 24V AC power
SYNC
(Dual power only)
L.L
V-PHASE
Phase contollable at 24V AC input(L/L mode)
ㆍThe ' ' or '- - ' icon appeared with desired function, press the set button to move sub menu.
ㆍThe '- - -' icon appeared with function that is unavailable according to function setting.
* User can control the menu by using PELCO-D, 2,400bps only.
3. When using control device through RS-485 protocol
(1) ENTER
ㆍPush the IRIS OPEN key : Used to access the menu and confirm
selection.
ㆍPush the IRIS OPEN key for one second : Open or close the menu
and use it to escape the setup in case of setting Privacy Zone or
Motion detection Zone.
(2) Up Down
ㆍMove Joystick to up/down or push the arrow key(↑,↓)
ㆍUsed to move the cursor to up or down to choose the menu.
(3) Left Right
ㆍMove Joystick to left/right or push the arrow key(← , →)
ㆍUsed to move the cursor to left or right to change the value.
(4) IRIS CLOSE KEY
ㆍUse it to move out to previous menu.
ㆍTo escape the setup when setting the Privacy Zone or Motion Zone.
<Caution> Do not use the menu key on the controller.
※All specification is subject to change without notice to improve the quality.
3B25201B