Abatement Technologies AIRE GUARDIAN AG8000 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de construcción Abatement Technologies AIRE GUARDIAN AG8000. Abatement Technologies AIRE GUARDIAN AG8000 20 páginas. Hard-sided mobile containment unit

Imprimir página

Warning: Pinch hazard! Do not use hands or fingers to unlock swivel casters or

personal injuries such as severe pinching or cuts could result. Use work shoe to

lock and unlock casters.

Supplying Power to the Unit

Power needs to be supplied to the unit in order for any of the electrical outlets to be

functional, including the powering of the PAS750, if applicable. Note that the raising and

lowering of the header does not require electricity as it is operated by a mechanical

mechanism.

Power must be supplied to the AG8000

in order for any of the outlets to be

operational. Plug the female end of an

extension

cord

SUPPLY outlet located on the back

side of the unit and the male end into a

110V-120V, 60Hz, single phase outlet.

Using the fiberglass extension ladder within the AG8000

Important: Be sure to read and understand all warning and instruction labels located

on the ladder before using the ladder.

Place the feet of the ladder into the recessed

pockets in the floor. Unbuckle the strap on

the left side of the ladder that secures the

three sections of the ladder together.

into

the

POWER

The AG8000 comes equipped with a

power cord wrap that is located below

the

POWER

(extension cord not included with

unit, P/N: AG8000CORD).

After raising the header to the

ceiling, the ladder can be extended

and placed against the ladder

bracket. Use the hook and loop

straps on each side of the ladder

bracket to secure the ladder.

SUPPLY

outlet