Dell PowerEdge 1855 Manual de uso - Página 12

Navegue en línea o descargue pdf Manual de uso para Servidor Dell PowerEdge 1855. Dell PowerEdge 1855 44 páginas. Using dell blade servers in a dell poweredge high availability cluster
También para Dell PowerEdge 1855: Información actualizada (2 páginas), Manual de inicio rápido (12 páginas), Manual del usuario (33 páginas)

Imprimir página

Table 1-1. PowerEdge Blade Server Features

Server Enclosure

Supported blade server

modules

Maximum number of server

modules per server enclosure

Number of mezzanine card

slots per server module

In a Dell PowerEdge high availability cluster configuration, each server

module requires at least one expansion card. Expansion cards for either Fibre

Channel or Gigabit Ethernet (for iSCSI) are available, and allow the server

module to communicate with the shared storage system for the cluster. The

expansion cards, also known as daughter cards or mezzanine cards, are

installed on the server module and contain two I/O ports. These I/O ports are

internally connected to two separate I/O modules in the server enclosure.

By attaching to two separate I/O modules, an expansion card can provide

redundant paths and load balance the I/O from the server module to the

shared storage system(s) for the PowerEdge cluster solution. Table 1-1

outlines the number of expansion cards that are available on each supported

server module.

Each server module is also configured with two additional Ethernet ports for

cluster interconnects. These are internally connected to two separate Gigabit

Ethernet pass-through or Gigabit Ethernet switch modules in the server

enclosure. With certain server modules, it is also possible to configure

additional Ethernet ports, which can enable the use of NIC teaming on the

cluster public network.

For a list of supported Fibre Channel and iSCSI daughter cards, see the

Platform Guide for your PowerEdge cluster located on the Dell Support

website at support.dell.com.

Introduction

1855/1955

PowerEdge 1855, 1955

M1000e

PowerEdge M600, M605