Dell PowerEdge 2420 Manual - Página 7

Navegue en línea o descargue pdf Manual para Servidor Dell PowerEdge 2420. Dell PowerEdge 2420 8 páginas. Rack enclosures
También para Dell PowerEdge 2420: Manual (20 páginas), Manual (20 páginas), Manual (17 páginas), Manual (12 páginas), Manual (10 páginas), Manual (10 páginas), Manual (9 páginas), Manual (9 páginas), Manual (10 páginas), Manual (12 páginas), Manual (11 páginas), Manual técnico (37 páginas)

Imprimir página
Dell PowerEdge 2420 Manual
Cable Routing Procedures for Dell™ PowerEdge™ T610 Systems

Figure 5: Left-Side Mounted CMA Installation

Section 2: Cabling a Dell™ PowerEdge™ T610 System Without a CMA
NOTE: The CMA on Dell™ PowerEdge™ T610 systems is optional. Without the CMA installed, the
system must be powered down and all cables disconnected before it can be removed from the rack.

2.1 Routing the Cables

1.
Connect all applicable cables to the rear of the system and verify that all connections are secure.
2. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to
either the left or right CMA attachment brackets as described in the
See Figure 6 for an example of data cables secured to the left CMA bracket and power cables
secured to the right CMA bracket.
It is recommended that the cables be secured to the outer brackets, but cables may be secured to
3.
the inner brackets as well if desired.

Figure 6: Cable Routing Without a CMA

Rack Installation Instructions
.
Page 5