Dell UltraSharp UP3218K Manual de servicio - Página 5
Navegue en línea o descargue pdf Manual de servicio para Monitor Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 páginas.
También para Dell UltraSharp UP3218K: Manual del usuario (50 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de desmontaje (6 páginas)
Imprimir página
Tear off the
aluminum foil for releasing the speakers'
cable, then disconnect the cable from the connector.
Use a Philips-head screwdriver to remove four
S6
screws for unlocking the speakers. Remove the
speakers from the probers.
(No.1~4 Screw size=M2x6, Torque=3.5~4kgfxcm)
aluminum foil
2
Tear off three pieces of VBH tape on the specific
position as the picture below shown. Disconnect the
function key cable from the connector of the
interface board. Use a Philips-head screwdriver to
S7
remove eight screws for unlocking the middle iron
bezel with the panel module. Remove the middle
iron bezel.
(No.1~8 Screw size=M3x0.5xL4, Torque=4±0.5kgfxcm)
VBH tape
6
1
2
4. Disassembly and Assembly Procedures
3
1
4
VBH tape
7
8
3
4
5
Use a Philips-head screwdriver to remove four
screws for unlocking the bracket with the panel
module. Use a Jip to lift up the bracket, then tear off
S8
the black mylar tape for releasing the LVDS
connectors. Disconnect the LVDS cables from the
connectors of the panel module.
(No.1~4 screw size=M3x0.5xL4, Torque=4
3
1
Remove the middle iron bezel. Tear off the mylar tape
S9
for releasing the function key cable from the hooks of
the middle iron bezel.
Lift up the bracket chassis module and put it on a
S10
protector
cushion.
0.5kgfxcm)
±
2
4