is used to populate the name of the storage cluster on the admin console as well as in stream
metadata for all streams written to the local cluster. The CSN also uses this name to detect all the
nodes participating in the cluster. For all of these purposes, the name must be unique. An IANA fully
qualified domain name is recommended.
Are these values correct (yes/no)? This last step allows you to review the values entered
for all prompts before submitting them. Answering yes will allow the initial configuration process to
proceed with network and service configuration, resulting in a fully functional CSN. Answering no to
the final initial configuration prompt will restart the initial configuration script at the first prompt, with
the previously entered values populated.
At the completion of a successful initial configuration, the CSN will immediately reboot the server
to initialize all services. When the node comes back up all network services will be configured
and available including SNMP, syslog, DHCP, DNS, NTP, and firewall. Additionally, the CSN
Console will be available, the SCSP Proxy will be configured and started and the DX Content Router
Publisher will be configured and started.
2.3.2. Secondary CSN Configuration
Once a Primary CSN has been configured on the network, a Secondary CSN may also be
configured. The Secondary only requires entry of a single unique external IP address and
identification of the internal interface that is already defined on the Primary. The Secondary will then
pull much of its network configuration data from the Primary. To facilitate this, a one-time use of the
Primary's root password is required as follows:
Additional information about the network will be obtained from the
primary CSN
Please enter the primary csn root password []:
Please re-enter the primary csn root password []:
Taken from the confirmation at the end of the initial configuration script, the Secondary configuration
parameters are simply:
Primary: no
External CSN IP address: 192.168.66.11
Internal network interface: 172.20.20.0
Are these values correct (yes/no)?
2.3.3. Configuring Object Storage Cluster Licensing
Subsequent to rebooting after configuration and prior to booting any storage cluster nodes, an
aggregate license file comprised of any capacity keys included with your hardware or sent by your
hardware manufacturer must be entered and published via the administrative CSN Console. The
console allows web-based configuration of all CSN services after the initial network configuration.
Please reference subsequent chapters for a full overview of console capabilities.
To access the console initially for license publication, enter the following
<CSNExternalIP>:8090
username for the console is 'admin' and the default password is 'dell'. Once authenticated, click on
the Licensing link under the Content Storage tab to access the licensing interface.
Copyright © 2010 Caringo, Inc.
All rights reserved
. You will be required to authenticate prior to being granted access. The
6
address:http://
Version 2.0
December 2010
Imprimir página