Dell Force10 Software Defined Networking Manual de implantación - Página 10

Navegue en línea o descargue pdf Manual de implantación para Interruptor Dell Force10 Software Defined Networking. Dell Force10 Software Defined Networking 36 páginas. Z series software-defined networking (sdn) deployment guide version 1.0

Imprimir página
Parameter Type
Parameters
Optional match fields
•
•
Mandatory actions
•
•
•
Optional actions
OFPAT_SET_VLAN is optional for OpenFlow (OF) ports and mandatory for OF virtual local area
networks (VLANs).

L2 Flows

Parameter Type
Parameters
Mandatory match
•
fields
•
Optional match fields All fields other than dl_vlan and dl_dst must be wildcards.
Mandatory actions
Single OFPAT_OUTPUT action to a switch port.
Optional actions
None.

Learning Bridge (LB) Flows

Parameter Type
Parameters
Mandatory match
•
fields
•
•
Optional match fields All fields other than the ones listed in "Mandatory match fields" must be wildcards.
Mandatory actions
Single OFPAT_OUTPUT action to a switch port.
Optional actions
None.

Max Limits

This section defines the maximum number of permitted flow types. The number of available flow types varies depending
on the type of flow.
•
You can provision up to eight OF instances on each switch.
•
The number of flows supported on each switch depends on the flow type.
10
nw_dst (dst-ip)
All fields other than the ones listed in "Mandatory match fields" and "Optional match
fields" must be wildcards.
You must specify set_dl_src (set src-mac) as the port mac (local mac) for the
swtich.
set_dl_dst (set dst-mac)
Single OFPAT_OUTPUT action to a switch port.
dl_vlan (input vlan id)
dl_dst (dst-mac)
dl_src (src-mac)
dl_dst (dst-mac)
LB flows will only be installed in the L2 table if bidirectional traffic is present.