Dell PowerEdge M710 Manual técnico - Página 10

Navegue en línea o descargue pdf Manual técnico para Interruptor Dell PowerEdge M710. Dell PowerEdge M710 31 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M710: Información actualizada (38 páginas), Manual de actualización (44 páginas), Manual de actualización (21 páginas), Manual de actualización (14 páginas), Manual de instalación (7 páginas), Manual de actualización (1 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas)

Imprimir página

Dell™ PowerEdge™ M710 Technical Guidebook

e. usb key

The M710 supports the following USB devices:

• D VD (bootable; requires two USB ports)

• U SB Key (bootable)

• K eyboard (only one USB keyboard is supported)

• M ouse (only one USB mouse is supported)

f. battery

A replaceable coin cell CR2032 3V battery is mounted on the planar to provide backup power for the

Real-Time Clock and CMOS RAM on the ICH9 chip.

G. field Replaceable units (fRu)

The planar contains a serial EEPROM to contain FRU information including Dell part number, part revision

level, and serial number. The Advanced Management Enablement Adapter (AMEA) also contains a FRU

EEPROM. The backplane's SEP and the power supplies' microcontroller are also used to store FRU data.

sectiOn 3. enviROnMental sPecificatiOns anD acOustics

a. environmental specifications

enviROnMental

Temperature

Operating

Storage

Relative Humidity

Operating

Storage

Maximum Vibration

Operating

Storage

Maximum Shock

Operating

Storage

Altitude

Operating

Storage

10° to 35°C (50° to 95°F)

NOTE: Decrease the maximum temperature by 1°C (18°F) per 300m (985 ft.) above 900m (2955 ft.)

-40° to 65°C (-40° to 149°F)

8% to 85% (noncondensing) with a maximum humidity gradation of

10% per hour

5% to 95% (noncondensing)

0.26 Grms at 10-350Hz for 15 mins

1.54 Grms at 10-250Hz for 15 mins

One shock pulse in the positive z axis (one pulse on each side of the

system) of 41 G for up to 2 ms

Six consecutively executed shock pulses in the positive and negative

x, y, and z axes (one pulse on each side of the system) of 71 G for up

to 2 ms

-16 to 3048 m (-50 to 10,000 ft.)

-16 to 10,600 m (-50 to 35,000 ft.)