Dell PowerEdge M910 Manual técnico - Página 18

Navegue en línea o descargue pdf Manual técnico para Interruptor Dell PowerEdge M910. Dell PowerEdge M910 45 páginas. M-series blade servers
También para Dell PowerEdge M910: Manual de actualización (44 páginas), Manual de actualización (21 páginas), Manual de actualización (14 páginas), Manual de instalación (7 páginas), Manual de actualización (28 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Manual técnico (46 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas), Manual técnico (49 páginas)

Imprimir página

Thermal

The M910 thermal solution includes:



Optimized airflow impedance for individual blade and chassis level airflow balancing



Custom air baffling directs airflow through the components to maintain proper cooling



Custom-designed heat sinks maintain CPU, IOH and Intel 7500 chip temperatures within thermal

design targets



Highly Optimized Fan Control Algorithm such as the following:

Base fan speeds are a function of hardware configuration and ambient temperature to

—

minimize airflow for a given environment

PID control algorithms are used for both CPU and DIMMs to maintain appropriate thermal

—

margin

Double refresh switching allows for DIMM temperature excursions up to 95°C while

—

maintaining performance and thermal design targets as follows:

The M910 thermal algorithm monitors the thermal sensor on each DIMM to maintain

DIMM temperatures below the typical 85°C specification in normal operating conditions.

Under extreme operating conditions, the thermal algorithm can switch the DIMMs into

Double Refresh mode allowing an additional 10°C of thermal headroom. In Double

Refresh mode, DIMMs are allowed to operate as high as 95°C.

Power efficiency

One of the main features of blade servers is enhanced power efficiency. The PowerEdge M910

achieves higher power efficiency by implementing the following features:



User-configurable power options via the M1000e CMC



Improved power budgeting



Voltage regulator efficiency improvements



CPU VR dynamic phase shedding



Switching regulators instead of linear regulators



Closed loop thermal throttling



Use of DDR3 memory (lower voltage compared to DDR2)



Memory VR static phase shedding



BIOS Power/Performance options page



Active Power Controller (BIOS-based CPU P-state manager)



Ability to throttle memory



Ability to disable a CPU core



Ability to turn off embedded NICs or PCIe lanes when not being used



Energy Smart components at the M1000e chassis level to selectively enable more computing

performance with less power consumption

PowerEdge M910 Technical Guide