Dell PowerEdge M915 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Interruptor Dell PowerEdge M915. Dell PowerEdge M915 23 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M915: Notas de publicación (27 páginas), Manual (25 páginas), Manual de información importante (35 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Manual del usuario (3 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas)

Imprimir página
Dell PowerEdge M915 Manual del usuario
Rev 1.0
2
Installation and Basic Operation
2.1

Unpacking the Pass Through Module

Before you install your new PTM, unpack it and make sure that there is no visible damage that
may have occurred during shipping. Your package should contain the following items:
• Dell 10Gb Ethernet Pass Through -k module for Blade Servers
• This Users Manual
The PTM is shipped without optical modules.
If anything in the package is damaged or missing, please contact your customer representative
immediately.
2.2

Insertion and Removal of the PTM

The Dell 10Gb Ethernet Pass Through -k module may be plugged into fabric slots A1, A2, B1, B2,
C1, and C2.
Determine which slot to use, based on desired system configuration.

2.2.1 PTM Insertion

Insert the PTM into the chassis as shown in the following diagram:
8
Figure 3: Dell Chassis Slots for the PTM
Slot A1
Slot B1
Slot C1
Slot C2
Slot B2
Installation and Basic Operation
Slot A2