Dell PowerVault 51F Manual de conexión - Página 22
Navegue en línea o descargue pdf Manual de conexión para Interruptor Dell PowerVault 51F. Dell PowerVault 51F 38 páginas. Dell powervault 56f switches rack installation guide
También para Dell PowerVault 51F: Manual de instalación (8 páginas), Manual del usuario (42 páginas), Manual de instalación del bastidor (28 páginas)
Imprimir página
3-4
Dell PowerVault 5xF Switches Zoning Guide
7 .
Enable the new configuration.
8.
Test the new configuration.
9.
Save the new configuration again.
( +
1.
Create an alias for the device by typing
(or port number).
2.
Add the zone that contains the device by typing
.
3.
Save the configuration by typing
4.
Enable the configuration by typing
, +
%
1.
Remove the device by typing
2.
Save the configuration by typing
3.
Enable the configuration by typing
,
+
1.
Remove the device by typing
2.
Create an alias for the device that you want to use as a replacement by typing
3.
Add the zone that contains the device by typing
.
4.
Save the configuration by typing
5.
Enable the configuration by typing
& )%'
When two fabrics with zone configuration information are joined, the zoning software
attempts to merge the two zone configurations. Dell does not support merging fab-
rics. However, Dell does support splitting fabrics. See the following subsection for
more information.
* %'
A fabric will split into two separate fabrics if an ISL fails. Each new fabric retains the
same zone configuration.
.
.
.
.
(or port number).
.
.
.
.