Dell S4048-ON Manual de configuración - Página 25

Navegue en línea o descargue pdf Manual de configuración para Interruptor Dell S4048-ON. Dell S4048-ON 30 páginas. Enterprise switches
También para Dell S4048-ON: Manual de configuración (19 páginas), Manual de solución de problemas (29 páginas)

Imprimir página

Switch configuration (OS 10.x)

3.2.11

Apply policies and VLAN ID to all switch edge ports (except port-channel

member ports)

OS10(config)# interface range ethernet 1/1/1-1/1/48

OS10(conf-range-eth1/1/1-1/1/48)# switchport mode trunk

OS10(conf-range-eth1/1/1-1/1/48)# switchport trunk allowed vlan <vlan-id>

OS10(conf-range-eth1/1/1-1/1/48)# service-policy input type network-qos <policy-

map-name>

OS10(conf-range-eth1/1/1-1/1/48)# service-policy output type queuing <queuing-

policy-name>

OS10(conf-range-eth1/1/1-1/1/48)# ets mode on

OS10(conf-range-eth1/1/1-1/1/48)# qos-map traffic-class <queue-map-name>

OS10(conf-range-eth1/1/1-1/1/48)# priority-flow-control mode on

OS10(conf-range-eth1/1/1-1/1/48)# exit

OS10(config)#

3.2.12

Apply policies and vlan id on port-channel and its member ports

OS10(config)# interface port-channel1

OS10(conf-if-po-1)# switchport mode trunk

OS10(conf-if-po-1)# switchport trunk allowed vlan <vlan-id>

OS10(conf-if-po-1)# no shutdown

OS10(conf-if-po-1)# exit

OS10(config)#

This configuration guide uses ports 1/1/49 and 1/1/50 as port-channel member ports which are configured

using following commands.

OS10(config)# interface range ethernet 1/1/49,1/1/50

OS10(conf-range-eth1/1/49,1/1/50)# service-policy input type network-qos

<policy-map-name>

OS10(conf-range-eth1/1/49,1/1/50)# service-policy output type queuing <queuing-

policy-name>

OS10(conf-range-eth1/1/49,1/1/50)# ets mode on

OS10(conf-range-eth1/1/49,1/1/50)# qos-map traffic-class <queue-map-name>

OS10(conf-range-eth1/1/49,1/1/50)# priority-flow-control mode on

OS10(conf-range-eth1/1/49,1/1/50)# exit

OS10(config)# exit

OS10(config)#

3.2.13

iSCSI enable

OS10(config)# iscsi enable

OS10(config)# iscsi session-monitoring enable

OS10(config)# exit

3.2.14

Save configuration

OS10# copy running-configuration startup-configuration

Dell EMC Networking S4048-ON Switch Configuration Guide for Dell PS Series SANs | SCG1026