Dell S4810-ON Manual de instalación - Página 31

Navegue en línea o descargue pdf Manual de instalación para Interruptor Dell S4810-ON. Dell S4810-ON 42 páginas.

Console Ports

The Z9000 has two management ports available for system access—a console port and a Universal serial

bus (USB)-B port.

The USB-B ports act exactly the same as the console port. The terminal settings are the same for both

access ports.

The RS-232/RJ-45 console port is labeled on the upper-right-hand side of the S8410–ON chassis (the

I/O side) (as shown in the following illustration).

NOTE: Before starting this procedure, be sure that you have a terminal emulation program already

installed on your PC.

Figure 11. S4810–ON Serial Console Port Connector

RJ-45 Console Port

The following table lists the console port pinout assignments.

To access the console port, follow these steps.

Install an RJ-45 copper cable into the console port. Use a rollover cable to connect the S4810–ON

console port to a terminal server.

Connect the other end of the cable to the dumb terminal emulator (DTE) server.

Console Ports