Miele Novotronic G 841 SC Plus Manual de instrucciones - Página 18

Navegue en línea o descargue pdf Manual de instrucciones para Lavavajillas Miele Novotronic G 841 SC Plus. Miele Novotronic G 841 SC Plus 48 páginas. Miele novotronic dishwasher operating instructions
También para Miele Novotronic G 841 SC Plus: Manual de instrucciones (49 páginas)

Miele Novotronic G 841 SC Plus Manual de instrucciones
Before using for the first time

Salt indicator

When the salt reservoir is empty, the
"Salt-PC" indicator will light, indicating
that it should be refilled with reactiva-
tion salt.
After the reservoir has been filled, the
water softener is automatically reacti-
vated the next time the dishwasher is
started. The "Salt" indicator will be lit
during this process.
18
Bypassing the salt indicator
If your water is soft (below 8 gr/gal) the
salt reservoir should not be filled with
salt. The indicator will remain lit and
should be disregarded or bypassed.
^ Remove the salt reservoir cap.
Looking into the salt reservoir, you will
see the top of the float chamber on the
right hand side, a.
^ Using a screwdriver, carefully pivot
the float chamber towards the center
of the reservoir.
^ Using needle nose pliers, pull the
cap, b, off of the float chamber, and
remove the float, c.
Replace the float chamber cap, push
the chamber back into its upright posi-
tion, and replace the salt reservoir cap.
The "Salt" indicator should no longer be
lit.