Miele DA 2360 Instrucciones de uso e instalación - Página 29

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 2360. Miele DA 2360 36 páginas. Ventilation system
También para Miele DA 2360: Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (36 páginas), Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (36 páginas)

 Fit one of the screws supplied into

each lamp holder.

 Tighten the screws with a screwdriver

until the frame sits flush with the

installation surface.

Do not overtighten the screws!

 Refit the lamps.

Connection for air extraction



Before installation, it is important

to read the information given on the

following pages as well as the

"Appliance dimensions" and the

"Warning and Safety instructions" at

the beginning of this booklet. This is

particularly crucial when using the

rangehood at the same time as a

heating appliance that relies on

oxygen from the same room, which

could result in the build-up of toxic

fumes.

The rangehood should be installed

according to local and national

building regulations. Seek approval

from the building inspector where

necessary.

Only use smooth pipes or flexible

ducting made from approved non-

flammable materials for exhaust

ducting.

To achieve the greatest possible air

extraction with the lowest noise level,

please note the following:

– The diameter of the exhaust ducting

should not be less than 150 mm.

– If flat ducting is being used, the

cross-section must not be smaller

than the cross-sectional area of the

exhaust connection.

– The exhaust ducting should be as

short and straight as possible.

– Only use wide radius bends.

– The exhaust ducting must not be

kinked or compressed.

Installation