Miele DA 362 Manual de funcionamiento e instalación - Página 13
Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Campana de ventilación Miele DA 362. Miele DA 362 32 páginas. Cooker
The number of hours the appliance has
been in operation is stored in memory.
The indicator lamp for the grease filter
touch control will come on after 30
hours of operation. The
must then be cleaned.
After the grease filter has been cleaned
and put in place, the filter operating
hours counter must be re-set.
^ To do this, press the grease filter
touch control and hold for about 3
seconds.
The indicator lamp for the touch control
will go out.
For information on how to change the
operating hours counter see "Setting
and altering the grease filter operating
hours counter".
The charcoal filter indicator lamp will
light up after the cooker hood has
operated for the number of hours set
(see "Setting and altering the charcoal
filter operating hours counter"). The
must then be replaced
with new ones.
After the new charcoal filters have been
put in place, the filter operating hours
counter must be re-set.
^ Press the charcoal filter touch control
for about 3 seconds.
The indicator lamp for the touch control
will go out.
To check the percentage of time set
already used:
^ Switch the fan on with the joystick.
^ Press the grease filter or the charcoal
filter touch control.
One or several of the power level touch
control lamps will flash.
The number of flashing lights shows the
percentage of the operating time which
has already been used up.
1 lamp
= 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
13