Miele DA 398-5 Instrucciones de uso e instalación - Página 32
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 398-5. Miele DA 398-5 36 páginas. Miele ventilation system installation diagram
También para Miele DA 398-5: Diagrama de instalación (1 páginas), Instrucciones de uso e instalación (36 páginas)
Imprimir página
Air extraction
– If the exhaust is ducted into an
inactive flue, the air must be expelled
parallel to the flow direction of the
flue.
Never connect an exhaust hood to
an active chimney, dryer vent, flue,
or room venting ductwork. Seek
professional advice before
connecting an exhaust hood vent to
an existing, inactive chimney or vent
flue.
Important
If the ductwork runs through rooms,
ceilings, garages, etc. where
temperature variations exist, it may
need to be insulated to reduce
condensation.
32
Condensate trap
optional accessory
In some cases, a condensate trap may
also be required to collect and
evaporate any condensate which may
occur. This optional accessory is
available for ducts 5" (125 mm) and 6"
(150 mm) in diameter.
When installing a condensate trap,
ensure that it is positioned vertically
and if possible directly above the
exhaust outlet.