Miele DA2210 Instrucciones de uso e instalación - Página 25

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA2210. Miele DA2210 44 páginas. Cooker
También para Miele DA2210: Instrucciones de uso e instalación (36 páginas), Manual de dimensiones (1 páginas), Manual de funcionamiento e instalación (40 páginas), Instrucciones de funcionamiento e instalación (40 páginas), Manual del usuario (40 páginas), Instrucciones de uso e instalación (40 páginas), Manual de instrucciones de instalación (19 páginas)

Imprimir página
Miele DA2210 Instrucciones de uso e instalación
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
Resetting the filter saturation timer
for the grease filters
Once cleaning is complete, the filter
saturation timer must be reset.
 While the fan is turned on, press the
grease filter button  for approx. 3
seconds until only the first fan setting
indicator light flashes.
The indicator light for the grease filter
button  will go out.
When cleaning the grease filters before
the full time interval has elapsed:
 Press the grease filter button  for
approx. 6 seconds until only the first
fan setting indicator light flashes.
Cleaning and care

OdorFree Charcoal Filter

If the hood is equipped for recirculation,
either two (DA 2280) or four (DA 2210)
OdorFree Charcoal Filters must be
installed in addition to the grease filters.
These charcoal filters are designed to
absorb cooking odors.
They are inserted into the canopy above
the grease filters.
Charcoal filters are available from your
Miele dealer or from Miele. See
"Technical data" for the type and
reference number.
Installing/replacing the charcoal
filters
 Before installing or replacing the
charcoal filters, you must first remove
the grease filters (see previous
section for instructions).
 Take the charcoal filters out of their
packaging.
 Press the filters into the frame.
 Reinstall the grease filters.
 When installing the filter for the first
time, activate the filter saturation
counter (see "Operation").
25