HP 3000 969KS/420 Manual - Página 14

Navegue en línea o descargue pdf Manual para Escritorio HP 3000 969KS/420. HP 3000 969KS/420 20 páginas. 9x9 to k class conversion

•

If the computer is in a rackmount cabinet, a #15 and #25 TORX head driver are needed.

If the HP 9000 computer to be worked on is mounted in a rack, it may need to be removed for certain

procedures. Refer to the Cabinet Installation Guide part number A2375-90007, or the Computer

Cabinet Users Manual part number C2785-90001 for detailed procedures on removal of the

computer from the rackmount cabinet. The Service Manual also contains Removal and Replacement

procedures for the rackmount cabinet.

Modifying the Console, Primary and Alternate boot paths

The Console path is identical for the HP3000 and HP9000, However the Primary/Alternate boot

paths, UPS, LAN and Modem paths are different and must be modified. The following are the

default paths for the HP9000:

•

Console

10/4/0.0

•

Primary Boot

10/0.6

•

CDROM

10/12/5.2

•

DDS

10/12/5.0

The default values identified above may or may not apply to the customer's configuration. Using the

appropriate PDC commands, set the boot paths to the correct value.

Additionally, the following paths are different for the HP9000:

•

UPS

10/4/0.1

•

Modem

10/4/0.7

•

LAN

10/12/6

Conversion Procedures