Allo.com CRA 210 Manual de instalación rápida - Página 4
Navegue en línea o descargue pdf Manual de instalación rápida para Adaptador Allo.com CRA 210. Allo.com CRA 210 8 páginas. 3 port voip analog telephone adapter 3x ethernet ports, 2x voip lines+1x pstn landline
Imprimir página1.3.3.
1.3.4.
1.3.5.
1.3.6.
1.3.7.
WARNING:
Wait until the POWER, VOIP and WAN LED's turn green and remain stable on the Front Panel of your
ATA (LAN LED might also be green).
The ATA will get provisioned with your account information and you will be able to place and receive calls
as soon as the PHONE1 LED is red and stable (if you have two accounts, then both PHONE1 and
PHONE2 should be red). If you have not setup your VOIP account, then you must do that next, in order to
have it provisioned and working.
Connect the Standard Telephone Cable (RJ11) into the phone port labeled
PHONE1 (FXS1 below) as seen below (If you have a secondary account, or
T.38 Fax line, you can plug another phone or fax machine into PHONE2):
Connect the other end of the cable to your telephone
Connect another Standard Telephone Cable into the phone port labeled LINE
(FXO above) (this is to connect your PSTN line, if you wish to use your
Landline)
Connect the other end of the cable to the regular phone jack in the wall
(optional)
You may now plug the Power Adapter into an AC outlet which will power up the
ATA unit, as seen below:
Use only the Power Adapter included in this package.