ABB AutoLink Libro de instrucciones - Página 5

Navegue en línea o descargue pdf Libro de instrucciones para Equipamiento industrial ABB AutoLink. ABB AutoLink 12 páginas. 15kv, 27kv, 38kv
También para ABB AutoLink: Instrucciones de montaje (11 páginas)

Imprimir página

TEHI95094 – Rev. 2

4. Storage

When the apparatus is unboxed, it must be carefully unpacked and checked as described

in Chapter 3 of this manual.

If immediate installation is not possible, the product should be kept in its original packing.

If immediate installation is not possible, store the equipment on its original packaging in a

covered, well-ventilated, dry, dust-free, non-corrosive ambient, away from any flammable

materials and at a temperature between -5°C and +45°C.

In any case, avoid any accidental impacts or positioning which stresses the apparatus.

5. Description

The AutoLink Electronic Sectionalizer is a protection device that operates at a permanent

fault in the distribution line. It must be used together with a upstream recloser. Please take

note that the AutoLink is not a fuse tripping device, therefore it cannot be used as a

protection device by itself.

The AutoLink Electronic Sectionalizer is designed ONLY to protect

electrical equipment and NOT for saving people from accidents or

electrocution when contacting energized circuits.

6. Installation

6.1 General

Correct installation is very important. The manufacturer's instructions

must be carefully studied and followed. It is good practice to use

gloves for handling the pieces during installation.

6.2 Installation and service conditions

The following standards must be taken into particular consideration during installation and

service:

IEC 60694

IEC 61936: Electrical Installation

ANSI C37 63: Automatic Sectionalizer

All accident prevention regulations in relative countries

For special installation requirements or other operating conditions, please contact ABB.

5/ 12