Miller SUITCASE 12RC Manual del usuario - Página 34
Navegue en línea o descargue pdf Manual del usuario para Accesorios de soldadura Miller SUITCASE 12RC. Miller SUITCASE 12RC 36 páginas. Wire feeder with gun and meters
También para Miller SUITCASE 12RC: Especificaciones (2 páginas), Manual del usuario (40 páginas), Manual del usuario (40 páginas)
Imprimir página
.
Base selection of drive rolls upon the following recommended usages:
1. V-Grooved rolls for hard wire.
2. U-Grooved rolls for soft and soft shelled cored wires.
3. U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4. V-Knurled rolls for hard shelled cored wires.
5. Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).
Wire Diameter
Fraction
Decimal
.023/.025 in
.023/.025 in
.030 in
.035 in
.040 in
.045 in
.052 in
1/16 in
.035 in
.045 in
.052 in
1/16 in
5/64 in.
.035 in
.045 in
.052 in
1/16 in
.068-.072 in.
.068-.072
5/64 in.
.045 in
.052 in
1/16 in
5/64 in.
OM-1500-15 Page 30
Table 8-1. Drive Roll And Wire Guide Kits
Metric
0.6 mm
.030 in
0.8 mm
.035 in
0.9 mm
.040 in
1.0 mm
.045 in
1.2 mm
.052 in
1.3 mm
.062 in
1.6 mm
.035 in
0.9 mm
.045 in
1.2 mm
.052 in
1.3 mm
.062 in
1.6 mm
.079 in.
2.0 mm
.035 in
0.9 mm
.045 in
1.2 mm
.052 in
1.3 mm
.062 in
1.6 mm
1.8 mm
.079 in.
2.0 mm
.045 in
1.2 mm
.052 in
1.3 mm
.062 in
1.6 mm
.079 in.
2.0 mm
Drive Roll (2 Required)
Part No.
Type
087 130
V-Grooved
053 695
V-Grooved
053 700
V-Grooved
053 696
V-Grooved
053 697
V-Grooved
053 698
V-Grooved
053 699
V-Grooved
072 000
U-Grooved
053 701
U-Grooved
053 702
U-Grooved
053 706
U-Grooved
053 704
U-Grooved
132 958
V-Knurled
132 957
V-Knurled
132 956
V-Knurled
132 955
V-Knurled
V-Knurled
132 959
132 960
V-Knurled
083 489
U-Cogged
083 490
U-Cogged
053 708
U-Cogged
053 710
U-Cogged
Inlet Wire
Guide
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
221 030
S-0859