Aquasana EQ-400 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Sistemas de filtración de agua Aquasana EQ-400. Aquasana EQ-400 12 páginas. Whole house water filter
También para Aquasana EQ-400: Instrucciones de instalación (5 páginas)
3
Prepare Rhino Tank
Wrap your pipe nipples with NSF certified
plumber's tape. Connect the nipples to the
system's inlet and outlet.
NOTE: DO NOT use pipe
solvent (dope), as solvents
in some types of pipe dope
may cause damage to plastic
fittings. Do not over-tighten to
prevent damage to filter head.
4
COPPER PIPES ONLY (proceed to Step 5 for PVC Pipes)
When installing on metallic plumbing,
ensure you take the following
precautions. Securely install two (2)
grounding clamps and a #4 copper
wire (not included) across the
location where the system will be
installed. Tightly clamp at both
ends, as shown in the illustration.
ELECTRICAL SHOCK HAZARD
Prior to installation on metallic plumbing, securely install two grounding clamps and a #4 copper wire
per installation instructions. Failure to follow these instructions can result in death or electric shock.
5
Install Shut-off Valve and Ensure Spacing
1. Using a pipe cutter, cut into the main water supply line to install the
shut-off valve.
2. Loosely fit shut-off valve to calculate proper spacing of components.
3. Measure distance for Pre-Filter, Rhino tank, and optional add-ons
(Salt-Free Conditioner and UV) and mark pipe accordingly.
If you're installing additional add-ons make sure to read through
those separate installation manuals prior to fully installing your
complete system.
Ground
Clamp
WARNING
(Cont. on next page)
INSTALLATION STEPS
Ground
Wire
Ground
Clamp
5 5