Panasonic WVNS954 - NETWORK CAMERA Manual de instalación - Página 16

Navegue en línea o descargue pdf Manual de instalación para Videocámara Panasonic WVNS954 - NETWORK CAMERA. Panasonic WVNS954 - NETWORK CAMERA 31 páginas. Ip video cameras
También para Panasonic WVNS954 - NETWORK CAMERA: Especificaciones (2 páginas), Manual de instrucciones (21 páginas), Folleto (2 páginas), Referencia (2 páginas), Referencia (2 páginas), Nota de integración (8 páginas), Manual de instrucciones (21 páginas)

Imprimir página

Panasonic WVNS954 - NETWORK CAMERA Manual de instalación

Installations/connections

Installation

Before starting installation/connection, make sure that the power plug is not connected to an outlet.

Read the "Precautions for installation" section before starting installation/connection.( page 13)

Step 1

Remove the screw (M3 x 6) fixing the camera and the

base unit.

• Do not lose it since it is to be used to fix the cam-

era and the base unit again.

Step 2

Detach the base unit.

• Rotate the base unit to the direction as indicated

by the arrow mark as shown in the illustration, and

detach it.

Rotate

Fixing screw

Detach the dome

cover by pushing

upward after

loosening the

screws.

15°

Detach the base unit

after pushing it upward.

Step 3

Manufacture the camera and the decorative cover.

• It is necessary to fabricate the camera body and

the decorative cover to pull out the cables (power,

monitor out, LAN, alarm in/out, audio in/out) from

the side of the camera.

Refer to the following illustrations for how to fabri-

cate the camera body and the decorative cover.

[Fabricate the die-cast case of the camera]

* Mat a soft cloth when fabricating the die-cast body

of the camera body to prevent to scratch the dome

cover.

[Fabricate the decorative cover]

Bend and

remove it

using pliers,

etc.

Remove it using

a cutter, etc.