Aquatic AQ-BC-6BT Manual de uso e instalación - Página 5

Navegue en línea o descargue pdf Manual de uso e instalación para Reproductor multimedia Aquatic AQ-BC-6BT. Aquatic AQ-BC-6BT 13 páginas. Hide-away media player for bluetooth audio & mp3 devices
También para Aquatic AQ-BC-6BT: Manual de uso e instalación (16 páginas), Manual del usuario (11 páginas), Manual de uso e instalación (14 páginas)

Imprimir página
Getting Started

1.4. Mounting the BlueCube Media Player

1. Make sure the outside surface is clean
and clear of debris.
2. The BlueCube Media Player has four (4)
front screws. Drive the screws using a screw
driver. Make sure screws are snug and do
not over tighten.

1.5 Bluetooth Antenna Installation

1. Screw on the provided Bluetooth Antenna,
avoiding bending the cable at a 90° angle.
2. Install the Bluetooth antenna as high as
possible, above the waterline of the spa if possible,
and making sure the arrow is pointing directly
upwards towards the sky to ensure the Bluetooth
range is maximized. If there is no suitable surface
to screw it in, we recommend using a good quality
double sided tape.

1.6 Power Attenuation Wires

The AQ-BC-6BT Bluecube Media Player's
power can be reduced or increased to suit
different applications. An output level
of -3dB or -6dB should be used to avoid
blowing very small speakers, often used in
spa applications.
By cutting only the white wire the output level will decrease to -6dB below the nominal 0dB.
By cutting both the white and black wires the power/volume will increase to +6dB above the
nominal 0dB.
By cutting only the black wire the power/volume will increase from -3dB to the nominal 0dB.
These modifications should only be carried out by an experienced audio installer.
Should you cut the wrong wires or wish to reconnect them to further alter the attenuation, the Power Attenuation
Wires can be crimped back together.
www.aquaticav.com
Black Wire
White Wire
Intact (not cut)
Intact (not cut)
Intact (not cut)
Cut
Cut
Intact (not cut)
Cut
Cut
BlueCube Media Player AQ-BC-6BT
Output Level
-3dB
-6dB
0dB (reference)
+6dB
5