Diatip CD 600 Economy Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Torno Diatip CD 600 Economy. Diatip CD 600 Economy 13 páginas. Retipping system

Midhage Diatip AB

CHANGING THE MATRIX AND KNIFE

Guide Pin

Remove the existing matrix by turning the

handle counter clockwise. Place the

cutting handle so that the blade stays in

its back position.

Loosen the allen screw which holds

existing blade. Pull it out and replace with

the new cutting blade and re-tighten.

Insert the new matrix. If the replacement

matrix and blade is the 16 mm or 20 mm

size the arrow on the top must then point

to the "D" position. Tighten the handle.

Be sure that the guide pin in the bottom of

the cutter head fits into the hole on the top

of the matrix.

By moving the cutting handle back and

forward, check to make sure that the

blade slides accurately into the matrix and

tighten the handle clockwise.

May 2003