Alpha Technologies AlphaNet DSM3 Series Manual de instalación e inicio rápido - Página 6
Navegue en línea o descargue pdf Manual de instalación e inicio rápido para Unidad de control Alpha Technologies AlphaNet DSM3 Series. Alpha Technologies AlphaNet DSM3 Series 6 páginas.
Imprimir página
Total Power Solutions
Initial Turn-up and Test / Returning the unit to Service
1. Plug the power supply into the AC outlet (if not already plugged in).
2. Switch battery breaker ON.
3. The DSM Series 3 Status LEDs will all blink in unison upon initial power up.
The RDY LED will then begin blinking steadily indicating normal processor
activity.
4. Verify the DS and REG LEDs are on solid. This verifies the Communications
Module has registered an IP address on the network.
5. Verify the RF LED is solid Green, indicating Upstream and Downstream Power
is within the default specified range and the Upstream RF Power is below the
recommended +50 dBmV.
6. Verify no XM2 / XM2-HP alarms are active.
Test Connection
With the DSM3 Series Transponder used in conjunction with the CableUPS, connectivity may be verified via the Smart Display
on the XM2-HP Power Supply. The connection may also be tested using a computer and a standard Ethernet cable. Connect the
computer to the Ethernet port on the transponder, launch an Internet browser (e.g. Internet Explorer) and enter 192.168.100.1
in the address field. The General Configuration page shown below will appear and display connectivity, power levels and power
supply status information. The power supply parameters will populate on the bottom half of the General page. System Name,
System Location, System Contact and Common Logical ID may be edited on this page; when prompted for a User Name and
Password, use "Alpha" and "AlphaGet".
Alpha Technologies Inc.
Alpha Technologies Ltd.
3767 Alpha Way
7700 Riverfront Gate
Bellingham WA 98226
Burnaby BC V5J 5M4
USA
Canada
Tel: +1 360 647 2360
Tel: +1 604 436 5900
Fax: +1 360 671 4936
Fax: +1 604 436 1233
Alpha Technologies
Fig. 12, General Page
(Sample data values shown for illustration purposes only)
Alpha Technologies Europe Ltd.
Alpha Technologies
Twyford House, Thorley
GmbH
Bishop's Stortford, Hertfordshire
Hansastrasse 8
CM22 7PA
D 91126 Schwabach
United Kingdom
Germany
Tel: +44 1279 501110
Tel: +49 9122 79889 0
Fax: +44 1279 659870
Fax: +49 9122 79889 21
Alpha reserves the right to change specifications without notice.
© 2013 Alpha Technologies Inc. All Rights Reserved.
Alpha is a registered trademark of Alpha Technologies.
LED Color
Green
Blue
Red
AlphaTec Ltd.
AlphaTEK ooo
339 Saint Andrews Street
Khokhlovskiy Pereulok 16
Suite 101 Andrea Chambers
Stroenie 1 Office 403
3307 Limassol
109028 Moscow
Cyprus
Russia
Tel: +357 25 375675
Tel: +7 495 916 1854
Fax: +357 25 359595
Fax: +7 495 916 1349
746-114-B1-001B (04/2013)
RF Power Default Values
Rx Range (dBmV)
Tx Range dBmV)
+10 to -10
0 to +50
+15 to +10 and -10 to -15
+50 to +55
>+15 and <-15
>+55
Table 1, RF Power Default Values
Alpha Technologies
Suite 1903, Tower 1
33 Canton Road, Kowloon
Hong Kong
Tel: +852 2736 8663
Fax: +852 2199 7988
www.alpha.com
For more information visit