Olympus DP72 Manual de instrucciones - Página 16

Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Olympus DP72. Olympus DP72 40 páginas. Microscope digital camera

Fig. 7

Fig. 8

Installing the Camera Head

The C-mount screw has a sharp edge that should not be touched.

The camera head and camera adapter are precision modules. Be

careful not to drop them during attaching or detaching.

}The following procedure deals with the case using the combination of

the U-TV1X-2 camera adapter + U-CMAD3 C-mount adapter.

1. Screw in the U-CMAD3 C-mount adapter @ into the C-mount thread on

the bottom of the camera head ².

Then, loosen the clamping screw ³ at the bottom of the U-TV1X-2 camera

adapter, screw in the camera adapter into the C-mount adapter and tighten

the clamping screw.

· As the photographed field is as shown below, use a camera adapter

having magnification of 0.5X to 1X. (If a 0.35X camera adapter is used, the

peripheral part of the image will be obscured.)

Field number

· If a C-mount camera adapter from other manufacturer than Olympus is

used, the optical performance of the system may not be manifested fully.

Be careful in using other manufacturer's C-mount camera adapter or

C-mount lens

having a thread length

threaded section will hit the inside of the camera head and cause

damage to it.

Using a Commercially Available Tripod

}The DP-TRAD tripod adapter is provided with two types of screws (2 each)

and an Allen wrench. Use only the Phillips screws (x 2) with the DP72.

1. Attach the DP-TRAD tripod adapter | to the camera head 5 and clamp

them using the provided Phillips screws (x 2) with a Phillips screwdriver.

2. Attach the tripod to the tripod adapter | and tighten the tripod's clamping

knob 6 to secure the camera head.

(Figs. 7 & 8)

0.63X (FN 17.5)

0.5X (FN 22)

1X (FN 11)

over 6 mm. Otherwise, the