Alphacom a100 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Teléfono Alphacom a100. Alphacom a100 14 páginas. Executive range headsetphone

Imprimir página

Utilisation of Controls

The button functions are as follows:

0 - 9

* - #

Recall

Save

Tone

Redial

pause

Mute

Latchable Mute

(on base)

Headset

The switch functions are as follows:

Ring Vol

Ring pitch

ELR/TbR

pulse/Tone

Message Waiting

Headset Volume Control -

Visual Indicators: Ring -

Message Waiting

Headset Socket

Dialing digits.

Dialling codes for Mf signalling

for use on pbx or for star services

used to store the last number in a memory

Switches from Loop Disconnect to DTMf during dialling

Last number redial

Insert a pause in the dial sequence

To prevent the other party from hearing you (ie. push (on

handset) down to mute) or, alternatively, on specially adapted

models this can be amended to push-to-speak. In this

instance, the phone will be clearly marked as such.

To prevent the other party from hearing you (i.e. push

to mute). LED will illuminate when in use. push button again

to continue normal (two-way) conversation.

To enable headset operation, LED will illuminate when in use.

Allows you to set the level of the ringer loudness

Allows you to set the pitch of the ringer

Sets the Recall to Earth (ELR) or Timed break (TbR) Recall

Sets signalling (dialling) to Loop Disconnect (LD) or DTMf(Mf)

Sets the message waiting to 4 or 6 line configuration

Allows you to set the headset volume.

This indicates an incoming call by lighting up.

Operates where pAbx message waiting is operational

used to connect the headset (not supplied)