Alphacom Regency 605 Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Teléfono Alphacom Regency 605. Alphacom Regency 605 18 páginas. Regency range headsetphone

14.

Operating Procedure for PBX Connection

The Regency 605 Headsetphone is suitable for connection to a pAbX which returns

secondary proceed indication.

14.1

When connected to a pbX, the telephone will send a Recall Signal to

the exchange when the RECALL button is pressed. This Regency 605

Headsetphone provides either TIMED LINE bREAK RECALL or EARTH

RECALL. Consult your pbX supplier or maintainer to ascertain which is

compatible with your pbX. Having established which you require select

either ELR (Earth Recall) or TbR (Timed Line break Recall) using the ELR/

TbR switch.

Nb. Like the mute key the Recall key is a 'hard switch' not a 'soft press'

key. This means that it will only depress slightly, and will remain depressed

until released.

14.2

PBX PAUSE FACIlITy

On pAbX systems which provide secondary proceed indication you must

wait for the secondary proceed dial tone after dialling the initial access

digit(s), normally 9 for an outside line. for correct operation of the Memory

facilities it is therefore necessary to store a pause after the access digit to

ensure correct dialling. pressing the LNR key automatically inserts a 3.6

second pause in the dialling sequence.

Nb: Do not enter more than 3 consecutive pauses. failure to comply with

this may result in unsatisfactory operation and will invalidate the approval.

14.3

On 4 wire systems set the switch to MW1 to enable message waiting on

compatible systems. for 6 wire systems set the switches to MW2. Only

one message waiting telephone may be connected to an extension. If more

than one message waiting telephone is connected to a line, the system may

interpret this as an off hook condition.

14.4

It must be noted that there is no guarantee of correct working of this

telephone in all circumstances when connected to a PBX. Any difficulties

should be referred to the telephone supplier.

This telephone is approved for connection to most pbX's.

The supplier of this telephone should be consulted for an up to date list of

pbX's with which this telephone is compatible.