ABB ACS 600 Manual de inicio - Página 8

Navegue en línea o descargue pdf Manual de inicio para Controlador ABB ACS 600. ABB ACS 600 10 páginas. Frequency converters equipped with standard application program 5.x
También para ABB ACS 600: Manuales de instalación (2 páginas)

Imprimir página

Start-up Guide

7 – STARTING THE DRIVE THROUGH THE I/O INTERFACE

As default the external start/stop signal is read from the

digital input DI1, and the external speed reference from the

analogue input AI1.

Starting through a digital input:

• Press the LOC/REM key to change to external control

(no L visible on the first row of the panel display).

• Switch on digital input DI1.

Drive starts. The motor is accelerated to a speed

determined by the voltage level of analogue input AI1.

Stopping when in local control: Press

Stopping when in external control: Switch off digital input

DI1.

Press the LOC/REM key to change between local and

external control.

START-UP PROCEDURE

8 – STOPPING THE MOTOR

Valid if the factory macro is

selected. See Parameter

99.02 APPLICATION MACRO.

Valid if the factory macro is

selected. See Parameter

99.02 APPLICATION MACRO.

Standard Application Program