Digisol DG-SR3016 Manual de instalación rápida - Página 11

Navegue en línea o descargue pdf Manual de instalación rápida para Hardware de red Digisol DG-SR3016. Digisol DG-SR3016 12 páginas. Nvr series 4/8/16/24 - channel network video recorder

Imprimir página

Following are the solutions to problems that may occur during the installation and

operation of the NVR.

1) The NVR cannot boot up normally.



2) The NVR reboots automatically or stops working after boot up.



3) System cannot detect the hard disk.



This product comes with Two Years warranty. For further details about warranty

policy and Product Registration, please visit support section of

The power supply is not correct.

Switch power supply line is not in good connection/damaged.

The program updation is wrong.

The hard disk is damaged or the hard disk lines are broken.

The front panel is damaged.

The main board of the NVR is damaged.

The input voltage is not stable or too low.

The hard disk is damaged or the hard disk lines are broken.

The power of the switch power supply is low.

Bad heat radiator or too much dust or bad running circumstance for the

NVR.

The hardware of the NVR is damaged.

The hard disk power supply line is not connected.

The cables of the hard disk are damaged.

The hard disk is damaged.

The SATA port of main board is damaged.