Shimano BR-M6000 Manual del Concesionario - Página 30
Navegue en línea o descargue pdf Manual del Concesionario para Accesorios para bicicletas Shimano BR-M6000. Shimano BR-M6000 39 páginas. Hydraulic disc brake
También para Shimano BR-M6000: Manual del Concesionario (39 páginas)
Imprimir página
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Replacing the brake hose
(w)
(y)
(A)
3
(E)
(z)
(B)
(A)
4
5
(A)
To be continued on next page
Pass the brake hose through the
(B)
(C)
connecting bolt and olive.
(x)
(C)
(D)
Use a tapered tool to smooth out the
inside of the cut end of the brake hose,
and mount the connector insert.
(A)
Attach the brake hose to the TL-BH61 as
shown in the illustration, secure the
TL-BH61 in a vise, and then use a
hammer or similar tool to knock the
(B)
(z)
connector insert in firmly until the base
(C)
of the connector insert touches the end
(D)
of the brake hose.
(E)
If the end of the brake hose is not
touching the base of the connector
insert, the brake hose may become
disconnected or fluid leaks may occur.
After checking that the olive is
(z)
positioned as shown in the illustration,
apply premium grease to the threads of
the connecting bolt.
(B)
(C)
(w)
Direction of insertion
(x)
Cut end
(y)
Grease the outside of the olive.
(z)
Attach the cover to the
connecting bolt for the brake
lever.
(z)
1mm
(z)
2mm
30
(A)
Brake hose
(B)
Connecting bolt
(C)
Olive
(D)
Premium grease
(E)
Cover
(A)
Connector insert
(B)
Brake hose
(C)
Olive
(D)
TL-BH61
(E)
Vise
(A)
Brake hose
(B)
Olive
(C)
Connector insert