Samsung 240T - SyncMaster 240 T Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Monitor Samsung 240T - SyncMaster 240 T. Samsung 240T - SyncMaster 240 T 32 páginas. User manual (spanish)
También para Samsung 240T - SyncMaster 240 T: (Spanish) Instrucciones Para El Usuario (29 páginas)

Imprimir página

Setting up Your LCD Monitor

Turn off both your computer and the monitor.

Unplug the video cable from the back of the computer.

Turn on the monitor.

If the monitor is functioning properly, you will see a white box with a large blue oval Samsung

logo and an error messsage "CHECK SIGNAL CABLE." in black color.

Figure 5. Monitor self-test screen

* It shows signal source is not connected with one of Analog, Digital, Video or S-Video.

This box also appears during normal operation if the video cable becomes disconnected or

damaged.

Turn off your monitor and reconnect the video cable; then turn on both your computer and

the monitor.

If your monitor screen remains blank after following the previous procedure, check your video

controller and computer system; your monitor is functioning properly.

Getting Help

If your monitor does not display an image, check your cable connections and refer to

"Troubleshooting" on page 21. If you experience difficulties with the quality of the displayed

image, run Auto Adjustment by touching "AUTO" control button. You may want to refer to

"Adjusting Your LCD Monitor" on page 8 or "Troubleshooting" on page 21.

Warm-up Time

All LCD monitors need time to become thermally stable whenever you turn on the monitor

after letting the monitor be turned off for a couple of hours. Therefore, to achieve more

accurate adjustments for parameters, allow the LCD monitor to warm (be on) for at least 20

minutes before making any screen adjustments.

CHECK SIGNAL CABLE

Analog*

English