Cisco 7941G - Unified IP Phone VoIP Manual de administración - Página 9

Navegue en línea o descargue pdf Manual de administración para Teléfono IP Cisco 7941G - Unified IP Phone VoIP. Cisco 7941G - Unified IP Phone VoIP 12 páginas. Unified communications manager 9.0 (sccp and sip)
También para Cisco 7941G - Unified IP Phone VoIP: Manual del usuario (21 páginas), Manual del usuario (25 páginas), Ficha de datos (7 páginas), Referencia rápida (2 páginas), Manual del usuario (4 páginas), Manual del usuario (4 páginas), Manual del usuario (13 páginas), Manual del usuario (13 páginas), Manual del teléfono (30 páginas), Manual del usuario (13 páginas), Manual del usuario (6 páginas), Manual de administración (16 páginas), Solución de problemas y mantenimiento (27 páginas)

Cisco Unified IP Phones and Your Network

• Quickly enter phones into the Cisco Unified Communications Manager database and modify any settings,

• Move autoregistered phones to new locations and assign them to different device pools without affecting

Note

Cisco recommends that you use autoregistration to add fewer than 100 phones to your network. To add

more than 100 phones to your network, use the Bulk Administration Tool (BAT).

Autoregistration is disabled by default. In some cases, you might not want to use autoregistration; for example,

if you want to assign a specific directory number to the phone. For information about enabling autoregistration,

see "Enable autoregistration" section in the Cisco Unified Communications Manager Administration Guide.

When you configure the cluster for mixed mode through the Cisco CTL client, autoregistration is

Note

automatically disabled. When you configure the cluster for nonsecure mode through the Cisco CTL client,

autoregistration is automatically enabled.

Autoregistration and TAPS Phone Addition

You can add phones with autoregistration and TAPS, the Tool for Auto-Registered Phones Support, without

first gathering MAC addresses from phones.

TAPS works with the Bulk Administration Tool (BAT) to update a batch of phones that were already added

to the Cisco Unified Communications Manager database with dummy MAC addresses. Use TAPS to update

MAC addresses and download predefined configurations for phones.

Cisco recommends that you use autoregistration and TAPS to add less than 100 phones to your network.

Note

To add more than 100 phones to your network, use the Bulk Administration Tool (BAT).

To implement TAPS, dial a TAPS directory number and follow the voice prompts. When the process completes,

the phone has downloaded the directory number and other settings, and the phone is updated in

Cisco Unified Communications Manager Administration with the correct MAC address.

Autoregistration must be enabled in Cisco Unified Communications Manager Administration (System > Cisco

Unified CM) for TAPS to function.

Note

When you configure the cluster for mixed mode through the Cisco CTL client, autoregistration is

automatically disabled. When you configure the cluster for nonsecure mode through the Cisco CTL client,

autoregistration is automatically enabled.

For more information, see "Bulk Administration" chapter in the Cisco Unified Communications Manager

Administration Guide and the "Tool for Auto-Registered Phones Support" chapter in the Cisco Unified

Communications Manager Bulk Administration Guide.

such as the directory numbers, from Cisco Unified Communications Manager.

their directory numbers.

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Autoregistration and TAPS Phone Addition

Communications Manager 9.0 (SCCP and SIP)