Siemens SF 25M855 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Lavavajillas Siemens SF 25M855. Siemens SF 25M855 28 páginas.

Imprimir página

Tip

If the utensils are only lightly soiled,

slightly less than the indicated amount

of detergent is usually adequate.

Suitable detergents and care products

can be purchased online via our website

or via customer service (see back page).

Combination detergent

Apart from conventional detergents (Solo),

a number of products are offered with

additional functions. These products

contain not only the detergent but also

rinse-aid and salt replacement substances

(3in1) and, depending on the combination

(4in1, 5in1, etc.), additional components

such as glass protection or stainless steel

cleaner. Combination detergents function

only up to a specific degree of hardness

(usually 26° Clarke). Over this limit salt

and rinse-aid must be added.

As soon as combined detergents

are used, the rinse programme is adjusted

automatically to ensure the best possible

rinsing and drying result.

Notes

– You will obtain optimum rinsing

and drying results by using solo

detergents and applying salt and rinse

aid separately.

– If programmes are short, tablets

may not have full cleaning effect due to

different dissolving properties

and there may even be undissolved

detergent residue. It is recommended

to use washing powder for these

programmes.

– The Intensive programme (on some

models) requires one tab only. When

using washing powder, you can apply

some of this cleaning agent to the

inside of the appliance's door.

– Even if the rinse-aid and/or salt refill

indicator is lit, the rinse programme will

run correctly with combined

detergents.

– If using detergents in a water-soluble

protective cover: Take hold of the

cover with dry hands only and put

the detergent into an absolutely

dry detergent dispenser only, otherwise

the detergent may stick.

– If you switch from combined

detergents to solo detergents, ensure

that the water softening system

and amount of rinse aid have been

set to the correct value.