Siemens EC745RT90A Instrucciones de uso - Página 16

Navegue en línea o descargue pdf Instrucciones de uso para Placa Siemens EC745RT90A. Siemens EC745RT90A 25 páginas.

Warnings

Outer flame on minimum, inner flame on full power.

Inner flame on full power.

Inner flame on minimum power.

It is normal to hear a slight whistling noise while the

burner is operating.

When it is first used, it is normal for the burner to give off

odours; this does not pose any risk and does not indicate

a malfunction; they will disappear in time.

A few seconds after switching off the burner, it will make

a sound (thud). This is not a fault - this means that the

safety device is no longer operating.

Keep the burner as clean as possible. If the ignition

sparkers are dirty they will not light properly. Clean them

periodically using a small non-wire brush. Bear in mind

that the ignition sparkers must not suffer any serious

impacts.

An orange-coloured flame is normal. This is caused by

the presence of dust in the atmosphere, spilt liquids, etc.

The kitchen will become hot and humid when this gas

appliance is used. You must therefore ensure that the

kitchen is well ventilated: either keep the natural

ventilation apertures open, or install a ventilation system

(extractor hood).

If using the appliance intensively for prolonged periods,

you may require additional ventilation (e.g. by opening a

window) or more effective ventilation (e.g. by increasing

the cooktop's ventilation, if possible).

If the burner flames are accidentally blown out, switch off

the burner operating control knob and do not try to relight

it for at least one minute.

Use "Large" setting to bring the pan to the boil, then

adjust the flame between "Large flame" and "Economy

flame" to maintain the required pan temperature.

Important: