Cisco UNIFIED 6911 Manual del usuario - Página 32

Navegue en línea o descargue pdf Manual del usuario para Teléfono IP Cisco UNIFIED 6911. Cisco UNIFIED 6911 50 páginas. Telefone ip cisco unified
También para Cisco UNIFIED 6911: Ficha de datos (5 páginas), Manual de administración (10 páginas), Manual del usuario (15 páginas), Manual de administración (12 páginas), Tarjeta de referencia rápida (2 páginas), Manual (10 páginas), Manual (28 páginas), (Portugués) Inicio rápido (1 páginas)

Transfer Call Using Hookflash

• You can redirect a single call to another number that you specify. Transfer is accomplished differently

• You can connect two calls to each other without remaining on the line.

Transfer Call Using Hookflash

This procedure applies to the Cisco Unified IP Phone 6901 only.

Procedure

Step 1

Verify that you are on an active call (not on hold).

Step 2

Press and release the hookswitch to get a dial tone.

Step 3

Enter the phone number of the transfer recipient.

Step 4

Wait for the recipient to answer or skip to Step 5 while the call is ringing.

Step 5

Hang up to complete the transfer.

This procedure applies to the Cisco Unified IP Phone 6911 only.

Procedure

Step 1

Verify that you are on an active call (not on hold).

Step 2

Press Transfer

Step 3

Enter the phone number of the transfer recipient or press a speed dial button.

Step 4

Wait for the recipient to answer or skip to Step 5 while the call is ringing.

Step 5

Press Transfer again or hang up to complete the transfer.

(Cisco Unified IP Phone 6911 only)

After you connect to the transfer recipient, but before you transfer a call to this party—you can press the Line

button to toggle between the two calls. This allows you to consult privately with the party on each call before

you complete the transfer.

Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and

SIP)

depending on the phone model you have:

◦ Hookflash is used to transfer calls from the Cisco Unified IP Phone 6901.

◦

The Transfer button

is used to transfer calls from the Cisco Unified IP Phone 6911.

Calling Features