Ricoh Plockmatic SquareBack Trimmer Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Impresora Ricoh Plockmatic SquareBack Trimmer. Ricoh Plockmatic SquareBack Trimmer 45 páginas. Cip training
CIP Training Plockmatic SquareBack Trimmer
Safety Information
CAUTION:
•
The machine and its peripherals must be installed and maintained by a customer service
representative who has completed the training course on those models.
•
Always follow all warnings marked on, or supplied with, the equipment.
•
When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
•
Disconnect the power cord before you move the machine. While moving the machine, always
exercise care and make sure that the power cord will not be damaged under the machine.
•
Always contact service if relocating the equipment.
•
Do not move the machine while the machine is running.
•
Do not open covers while the machine is running.
•
Do not switch off the power while the machine is running. Make sure the machine cycle has ended.
•
Lay the power cord in a way that nobody will stumble over it. Do not place things on the cord.
•
Never attempt any maintenance function that is not specifically described in this documentation.
•
Always keep magnets and all devices with strong magnetic fields away from the machine.
•
If the place of installation is air-conditioned or heated, do not place the machine where it will be:
•
Subject to sudden temperature changes.
•
Directly exposed to cool air from an air-conditioner.
•
Directly exposed to heat from a heater.
•
If the machine is not used over an extended period of time it should be unplugged to prevent
damage in the case of overload.
NOTE:
•
The indications like front and rear, left and right refer to the paper transport direction.
•
The operator manual always has to be available at the place of use of the machine.
•
In the interest of technical development the company reserves the right to make alterations to
specifications without prior notice!
WARNING:
Do not put fingers or other parts between moving parts.