Ricoh Ri 1000 Manual de solución de problemas - Página 22
Navegue en línea o descargue pdf Manual de solución de problemas para Impresora Ricoh Ri 1000. Ricoh Ri 1000 27 páginas. Procedure for long-term storage
También para Ricoh Ri 1000: Manual del usuario (9 páginas), Manual de mantenimiento del usuario (7 páginas), Manual (22 páginas)
Imprimir página
The temperature is too low. Able to print.
Updating CTL Firmware.
Please wait.
Updating SCB Firmware.
Please wait.
Waste ink bottle is nearly full
Waste Ink Full
Empty the waste ink bottle before reset
the waste ink counter.
Here is a list of SC Service call
The SC must be cleared by fixing and rebooting the printer
Code
Description
900
HRB Fuse Blown
The fuse on the HRB (Head Relay Board) mounted behind the print heads on the
carriage unit has blown.
• The fuse cannot be replaced.
1. Replace the carriage unit
2. Replace CTL
910
FAN 1 Lock Detection
Exhaust Fan 1 lock behind printer is detected
• There is obstacle in exhaust fan 1
When an operator make power on, but the temperature
is low(below approximately 1℃).
After wait a moment, if the temperature is more than
1℃, printer will become active
while update Merlot Controller
while update SCB
Waste ink is nearly full
It is warning status.
Prepare to empty waste ink bottle.
Waste ink is full
It is error status.
To recover, Empty waste ink bottle.