Cisco 12000 - Series Chassis Modular Expansion Base Manual de instrucciones de sustitución - Página 27
Navegue en línea o descargue pdf Manual de instrucciones de sustitución para Enrutador de red Cisco 12000 - Series Chassis Modular Expansion Base. Cisco 12000 - Series Chassis Modular Expansion Base 40 páginas. Internet router line card failures
También para Cisco 12000 - Series Chassis Modular Expansion Base: Ficha de datos (9 páginas), Manual general (6 páginas), Manual de solución de problemas de hardware (18 páginas)
Imprimir página
Removing and Installing Line Card Memory
Figure 11
Remove Retaining Clip from Memory Module Socket
The retaining clip is not used with all ISE, Engine 4, and Engine 4+ line cards. If your SODIMM socket
Note
does not include the retaining clip; there is no problem. Simply ignore any instructions that refer to the
clip.
Step 5
Remove the SODIMM by gently moving the latches in an outward direction, parallel to and away from
the memory module until it releases and rotates to a 45-degree angle. (See
Figure
12,
Figure
13, and
Figure
14a.)
The latch on the SODIMM socket is enclosed by the metal strain relief latch. The latch should never be
Caution
moved past the metal strain relief latch.
Cisco 12000 Series Router Memory Replacement Instructions
27
78-4338-16