Cisco TelePresence SX10 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Sistema de conferencias Cisco TelePresence SX10. Cisco TelePresence SX10 38 páginas. In-room control on touch 10
También para Cisco TelePresence SX10: Manual de instalación (8 páginas), Manual del usuario (26 páginas), Manual rápido (2 páginas), Manual del usuario (34 páginas), Manual del usuario (29 páginas), Manual de usuario preliminar (9 páginas), Manual del usuario (38 páginas), Manual de instalación (8 páginas), Manual del usuario (2 páginas), Manual del usuario (37 páginas), Manual (45 páginas), Manual (45 páginas), Manual de instalación (2 páginas), Manual del usuario (34 páginas), Manual del usuario (5 páginas), Manual del usuario (38 páginas), Manual de introducción (46 páginas), Manual rápido (2 páginas)

Video Calls

Add Additional Participants to an Existing Call

In a call, navigate to Add and press OK on

the remote control. This will put the current

call on hold.

The calls are now merged together.

D15097.23 Cisco TelePresence SX10, SX20 User Guide JUNE 2020

Locate the participant to be added in the

usual way. Press OK.

Repeat the process to add more

participants, if needed.

Navigate to Add and press OK to expand

the call into a conference.

Press the red End Call button on the

remote control, or use the Cursor keys

to select End Call and then press OK to

terminate the call.

About

Video Conferences

Your network may be equipped

with the capability to initiate a video

conference with several participants.

The maximum number of

participants supported by your

video device depends on device

configuration and the video

infrastructure. If in doubt, contact

your video support team.

If you want to initiate a video

conference, you must call each

participant one by one.

If you are the one who initiated the

conference, you can end the entire

conference. The other participants

can only disconnect themselves

from the conference.