Cisco 3800 Series Configuración de - Página 12

Navegue en línea o descargue pdf Configuración de para Hardware de red Cisco 3800 Series. Cisco 3800 Series 32 páginas. Password recovery procedure
También para Cisco 3800 Series: Ficha de datos (8 páginas), Nota de aplicación (41 páginas), Manual de solución de problemas (15 páginas), Ficha de datos (20 páginas), Manual de inicio rápido (40 páginas), Manual del usuario (7 páginas)

Imprimir página
Cisco 3800 Series Configuración de
How to Configure Radio Settings on an Access Point
Command or Action
Step 4
dfs band frequency-group block
Example:
Router(config-if)# dfs band 1 2 block
Step 5
end
Example:
Router(config-if)# end
Step 6
show controllers dot11Radio interface
Example:
Router# show controllers dot11Radio 0/0/1
Step 7
copy running-config startup-config
Example:
Router# copy running-config startup-config
12
Configuring Radio Settings on an Access Point
Purpose
Prevents an access point from selecting a specific group of
frequencies during DFS.
•
The frequency-group value can be 1, 2, 3, or 4:
–
1 specifies frequencies 5.150 to 5.250 GHz.
–
2 specifies frequencies 5.250 to 5.350 GHz.
–
3 specifies frequencies 5.470 to 5.725 GHz.
4 specifies frequencies 5.725 to 5.825 GHz.
–
At least one group of frequencies must be specified.
•
Multiple groups are allowed.
Returns to privileged EXEC mode.
(Optional) Displays radio controller status.
The Current Frequency line of the output displays the
•
status of DFS, for example:
Current Frequency: 5300 MHz Channel 60 (DFS
enabled)
(Optional) Saves your entries in the configuration file.