Cisco ATA 191 Comenzar - Página 7

Navegue en línea o descargue pdf Comenzar para Hardware de red Cisco ATA 191. Cisco ATA 191 8 páginas. Analog telephone adapter
También para Cisco ATA 191: Manual del usuario (30 páginas), Manual de administración (4 páginas), Manual del usuario (10 páginas), Manual (10 páginas), Manual de inicio rápido (13 páginas), Manual de instalación (6 páginas), Manual del usuario (40 páginas), Manual del usuario (30 páginas)

Get Started with Your New ATA

Note

Insecure mounting might damage the ATA or cause injury. Cisco is not responsible for damages incurred

byinsecure wall-mounting.

Procedure

Step 1

Determine where you want to mount the unit. Verify that the surface is smooth, flat and dry.

Step 2

Drill two pilot holes into the surface 58 mm apart (about 2.28 in.).

Step 3

Insert a screw into each hole, leaving a gap of 5 mm (0.1968 in.) between the underside of each screw head

and the surface of the wall.

Step 4

Place the unit wall-mount slots over the screws and slide the unit down until the screws fit snugly into the

wall-mount slots.

Supported ATA Call Features

Depending on your system configuration, your ATA supports some or all the following call features:

Supported ATA Call Features

Get Started with Your New ATA